|
|
Test Rig Design Proposal for the Experimental Validation of Transmission Parameters in Closed Loop Torque Condition
Otipka, Václav ; Řehák, Kamil (referee) ; Prokop, Aleš (advisor)
The thesis deals with the design of the experimental testing rig. Test rig is designed to measure NVH transmission parameters. First, basic knowledge of vibro-acoustic measurement is discussed. This is followed by an evaluation of the most commonly used power devices to derive real loads on measured gearboxes. In more detail, a back-to-back test rig is disassembled among other things. In the thesis are described two main components, which are composed of a connecting element and a test bench. Both components were optimized during the design due to their modal properties. Numerical modal analysis was performed in ANSYS Workbench software. The thesis also includes strength calculations performed using both numerical and analytical approaches. The indispensable result of the design work is the complete drawing documentation. Finally, measurements of vibrations and noise on the physically made connecting element assembly have been performed and subsequently evaluated.
|
|
|
NVH of gearbox housing for electric vehicles
David, Jan ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This master’s thesis deals with determination of NVH parameters of the gearbox housing for electric vehicle. The introduction part is focused on the theoretical knowledge of this issue. Subsequently, the deviations of geometry on the gearbox were measure by 3D scan method. The next part of thesis is focused on the modal analysis, which is solved by numerical approach and followed by experimental verification. During the numerical calculation solving, the influence of the screw preloading on the modal properties of the structure, was also taken into account. Numerical harmonic analysis was then performed and the results were compared with the experimental approach. The conclusion is devoted to material damping and comparison of the individual results.
|
|
|
NVH of gearbox housing for electric vehicles
David, Jan ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This master’s thesis deals with determination of NVH parameters of the gearbox housing for electric vehicle. The introduction part is focused on the theoretical knowledge of this issue. Subsequently, the deviations of geometry on the gearbox were measure by 3D scan method. The next part of thesis is focused on the modal analysis, which is solved by numerical approach and followed by experimental verification. During the numerical calculation solving, the influence of the screw preloading on the modal properties of the structure, was also taken into account. Numerical harmonic analysis was then performed and the results were compared with the experimental approach. The conclusion is devoted to material damping and comparison of the individual results.
|
|
|
Test Rig Design Proposal for the Experimental Validation of Transmission Parameters in Closed Loop Torque Condition
Otipka, Václav ; Řehák, Kamil (referee) ; Prokop, Aleš (advisor)
The thesis deals with the design of the experimental testing rig. Test rig is designed to measure NVH transmission parameters. First, basic knowledge of vibro-acoustic measurement is discussed. This is followed by an evaluation of the most commonly used power devices to derive real loads on measured gearboxes. In more detail, a back-to-back test rig is disassembled among other things. In the thesis are described two main components, which are composed of a connecting element and a test bench. Both components were optimized during the design due to their modal properties. Numerical modal analysis was performed in ANSYS Workbench software. The thesis also includes strength calculations performed using both numerical and analytical approaches. The indispensable result of the design work is the complete drawing documentation. Finally, measurements of vibrations and noise on the physically made connecting element assembly have been performed and subsequently evaluated.
|
guest ::
